8 Tweaks To Optimise Your Snowboard Setup

snowboard setup

Play with and test your snowboard setup to find the optimal position that works best for your body type and riding style.

Your equipment is your connection to the snow. Your comfort level and ability to perform the board is influenced by how it is set up. These 8 tweaks can help to optimise your set up, so you can get the most enjoyment out of your gear and the mountain.

Your Snowboard Setup

Explore these areas to find and tweak your optimal snowboard setup:

  • Regular or Goofy

Before you set off on your ride, you need to determine your natural lead foot. Left foot as the lead foot is regular. Goofy means your right foot is the lead foot. If you have done any other board sports like skating or surfing you should have a good idea of what foot will be comfortable to lead the way.

If you aren’t sure, your dominant foot should be the back foot (the foot you would kick a football with). Or imagine running then sliding on ice, which foot would you put out first – This will be your front foot? If someone was to push you when your standing your legs together, which leg would you put out first to regain balance. Check out this awesome article from Whitelines on how to pick!

Snowboard setup, snowboard stance, snowboard equipment


  • Stance Width

How far apart your feet are when strapped in. A general rule of thumb for where to try first is to have your feet shoulder width apart. Or set your stance to the width your feet naturally take as you do a squat unattached to the board. A stance that is too wide or too narrow will inhibit your mobility. It can take a lot of testing to find the optimal stance that works best for your body.

Snowboard setup, snowboard equipment, snowboard stance


Your equipment setup will directly influence your comfort and enjoyment. Take the time to learn what works for you and your body.

  • Binding Angles

The angles the front and back bindings are set at. Binding near the nose will have a positive angle and the binding near the tail will have a negative angle. You want to set the angles to a position that is comfortable and natural for your body type / riding style. A ducked stance is generally the best and most versatile option. This means having positive angles on the front foot and negative angles on the back. Makes it a breeze to ride switch, you can steer more effectively, it’s easy on your knees and a comfortable position to stand in all day when snowboarding.

snowboard setup, snowboard bindings, snowboard equipment


Start at 9 on the front foot, -9 on the back foot.

Tweak for comfort by playing with angles like, 15 on the front foot, -12 on the back foot. Or even 18 on front foot, -15 on back foot.

snowboard setup, snowboard equipment, snowboard bindings


A “race” stance that is seen in an older carving snowboard setup has positive angles on both bindings. This places the rider in a more open position to encourage easier lateral movement with the hips across the board. As a result of the more open position, over time it can be uncomfortable, as well as difficult to do freestyle.

snowboard setup, snowboard equipment


  • Position of Bindings Tip to Tail

This dictates how much nose or tail your board has. Starting slap bang in the centre is always a good place to develop preference from. Some board styles like powder or all-mountain, will have a slightly longer nose when the stance is centred. True twin boards will give the option to have equal amounts of nose and tail. This makes it easier to ride, balance and land in switch.


snowboard setup, snowboard equipment, snowboard stance


  • Position of Bindings Edge to Edge

This will dictate how much toe or heel overhang you have. As you lean and bend through turns to get the board on edge, over-hang from the toes or heels will mean you can catch or drag them in the snow. You will want to centre the boot on the board so that there is equal length of toe and heel overhang. If you have big feet ride a wide size snowboard so that you minimise overhang.

Strap your boots in and turn the board upside down to check if they are centred on the board. You will clearly see if the boots are further over one edge compared to the opposite.

Example – If the boot is centred and the toes stick out over the toe edge but the heel cup doesn’t poke out at all. You can set the binding back towards the heel edge, so you reduce the over-hang on the toes and equal it out in the heels.


snowboard stance, snowboard setup, snowboard equipment


  • Forward Lean On Binding Highbacks

Most bindings will have a forward lean option that dictates the position of the highback and how it affects your lower body. If you increase the forward lean, its will push the knees and ankles into a more flexed position. This can make it more responsive when turning on to heel edge and easier to bend down through the lower joints. Forward lean can make a big difference if you are struggling to get a true carve on heel edge. Not as useful for boxes and rails, because it encourages more of an edge to slide out on.

Snowboard equipment, snowboard stance, snowboard setup


  • Aligned Highbacks

In most modern bindings you can rotate the highback. Response and comfort improve when the highbacks align with / run parallel to the heel edge. This makes for an easier edge to edge transfer and allows the boots to flex more naturally when trying presses or tweaking grabs.

Snowboard setup, snowboard equipment, snowboard bindings


  • Adjustable Toe on Baseplate

Most baseplates will have an extendable and retractable toe piece that looks like a pedal. This is to ensure direct connection and power transfer between the boots and the toe edge.

If your boot overhangs, the pedal will be sitting further down your foot away from your toes / end of the boot. Make an adjustment to ensure your toes and the pedal line up at the top. If you choose a small binding and are a larger boot size, you may need to extend the toe pedal so that it curls up to naturally cup underneath the toes.

To optimise your snowboard setup can take a lot of time and tweaking. Never be afraid to try something new for a couple of runs. If you don’t like it you can always change it back. In conclusion sometimes making the smallest change can have a huge knock-on effect in comfort, mobility and rider performance.

Easily Improve Your Snowboarding

Get this FREE Snowboard Yoga guide to improve your mobility and riding 🚀 📈

Exclusive Videos + Tips Inside To Upgrade Your:

❄️ Strength + Stamina

❄️ Mobility + Flexibility

❄️ Balance + Coordination

Practicing yoga at home is one of the best and fastest ways to develop your snowboarding

We won't send you spam. Unsubscribe at any time. Powered by ConvertKit
The following two tabs change content below.

Fraser Johnston

Founder & Trainer at Watch & Ride
CASI Lvl 3 | Evaluator Lvl 2 | Park Evaluator. After coaching and evaluating "instructor training programs" for several seasons, I fell in love with the science of snowboarding. I believe there is no better way to spend a day, than using your body for sport outside in nature! It is always such a joy to guide and watch people reach their potential on the snow, as well as surpass milestones of what they thought was possible. The goal for Watch & Ride is to create fun and simple Virtual Snowboard Lessons that are available to everyone and conveniently accessible. My wish is to grow the sport and evolve the way people learn to snowboard, ensuring they have fun, stay safe and get the best possible experience on the mountain.

2 Comment

  1. CSH says: Reply

    Wow. Informative, thorough and way to understand.

    1. I’m happy you found it useful and educational. Any other questions about your setup, please do not hesitate to ask!

Leave a Reply to CSH Cancel reply